1 / 7
Deopfer MBP-25 case for organ foot pedal — zdjęcie 1
1 / 7

Deopfer MBP-25 case for organ foot pedal

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

electronics face plate or whole enclosure for midi organ foot pedal Doepfer MBP-25

Ocena
0 / 5
Polubienia
0
Pobrania
19
Wydruki
0
Wyświetlenia
225
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

You can print the electronics faceplate alone if you want to save around 35 € on parts.
Alternatively, print the faceplate plus the left and right panels to build the complete case in 3D-printed form.

The 3D-printed parts include all necessary features:

Mounting points for the MBP-25 pedal

Cutouts for the MIDI connectors and power input

Screw holes for attaching the wooden panels

The wooden top, front, and back plates are simple rectangular panels with screw holes. Their thickness is flexible — just make the top panel wide enough to cover the unit.

For the feet, you’ll need two wooden slats measuring 18×30 mm or 20×30 mm. Faceplate for display is glued with double sided sticky tape.

Tagi