Deopfer MBP-25 case for organ foot pedal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
electronics face plate or whole enclosure for midi organ foot pedal Doepfer MBP-25
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
You can print the electronics faceplate alone if you want to save around 35 € on parts.
Alternatively, print the faceplate plus the left and right panels to build the complete case in 3D-printed form.
The 3D-printed parts include all necessary features:
Mounting points for the MBP-25 pedal
Cutouts for the MIDI connectors and power input
Screw holes for attaching the wooden panels
The wooden top, front, and back plates are simple rectangular panels with screw holes. Their thickness is flexible — just make the top panel wide enough to cover the unit.
For the feet, you’ll need two wooden slats measuring 18×30 mm or 20×30 mm. Faceplate for display is glued with double sided sticky tape.