Trunk Dividers (Fits 2024 Honda Ridgeline)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trunk Dividers, 3 Pieces, Large format printer required.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 223
- Wydruki
- 0
- Wyświetlenia
- 1474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Trunk divider for later model Ridgelines, These are rather large prints, so a large format printer may be necessary. STEP files included so you can mod to your liking. I've been running these for about a year now, and they have held up great. My outside pieces are PETG and the inside (honeycomb) is PLA+.
Printed on Prusa XL with a bed dimension of 360mm cubed. Middle part is 340mm x 267mm x 11mm thick. The outside pieces are 83mm x 27mm x 267mm tall.
Hardware Needed:
¼ - 20 nuts (x6 per divider)
¼ - 20 x ¾" long (Low head socket cap screw x6 per divider)