1 / 4
Modular Tape Dispencer System Hangers Both ends
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this provides an easy way to mount your tape bellow a shelf or similar surfice
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Description
Printing Instructions
Filiment
| Material Advised | PETG/PET/ASA |
Material Propaties Required
| Propperty | Type |
|---|---|
| Constancy | Hard |
| Durablity | Not brittle |
| Sun Bleaching Protection | depends on use case but would advise for long term use not using PLA |
Slicing
| Property | Information |
|---|---|
| Print Direction | On Back |
| Infill | 15% |
| Supports | Not Required |
| Nozzle Size | 0.4 (0.6 should be fine too) |
Overview
This is a modification of RyukyuDs design that solved the problem of what to do if you want to hang the tape dispencer bellow something else like a shelf.
Features Over Orriginal
- allows for hanging bellow a surfice
- male and female ends to counteract the bowing seen in versions with only one fixed end
Assembly Instructions
- Push on the ends of rod like a normal module
Instilation Instructions
- present to the surfice in question
- use a pencil to mark possiton
- drill holes were pencil marks are
- screw in apropriate screws by hand to get around the problem of hitting the rod