1 / 4
Modular Tape Dispencer System Hangers Both ends
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this provides an easy way to mount your tape bellow a shelf or similar surfice
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 26
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Printing Instructions
Filiment
| Material Advised | PETG/PET/ASA |
Material Propaties Required
| Propperty | Type |
|---|---|
| Constancy | Hard |
| Durablity | Not brittle |
| Sun Bleaching Protection | depends on use case but would advise for long term use not using PLA |
Slicing
| Property | Information |
|---|---|
| Print Direction | On Back |
| Infill | 15% |
| Supports | Not Required |
| Nozzle Size | 0.4 (0.6 should be fine too) |
Overview
This is a modification of RyukyuDs design that solved the problem of what to do if you want to hang the tape dispencer bellow something else like a shelf.
Features Over Orriginal
- allows for hanging bellow a surfice
- male and female ends to counteract the bowing seen in versions with only one fixed end
Assembly Instructions
- Push on the ends of rod like a normal module
Instilation Instructions
- present to the surfice in question
- use a pencil to mark possiton
- drill holes were pencil marks are
- screw in apropriate screws by hand to get around the problem of hitting the rod