Calipers groove and thread measuring jaw extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thin extensions for measuring depths of grooves and threads with regular calipers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapters that snap on regular 1/8" thick caliper jaws to allow measurement of thin features.
Groove and thread depth measuments while machining.
Works better with digital calipers due to their zero function, install, calibrate the new zero and measure your features. Install on both jaws for measusing diameters or on a single jaw to measure relative depths.
The accuracy will depend on your printer's capabilities and consistency along z-axis. Should work great in resin printers.
One could also re-finish the contact edges by milling, sanding or slightly heating the contact edges and pressing them against a clean caliper jaw while installed.
Printed in PETG, 0.4 mm nozzle and 0.2 mm layers.