KANAZAWA Tower fan bracket for rotating fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses bearings to allow for the tower fan to rotate. Mounted under desk.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Made for KANAZAWA Tower fan Leafless 120° [1]. It uses 6803-2RS Rubber sealed deep groove ball bearings[2] 17mm * 26mm 5mm to allow for the fan to rotate. Mounted under desk.
The bearing caps need to be screwed to make sure the bearings do not fall off. I would also suggest waiting to add the bearing near the top left mounting screw hold until after you mount the bracket or you can also pre-screw that hole and use a screw driver to put that screw in, so it doesn't get in the way.
[1] https://shopee.ph/KANAZAWA-Tower-fan-Leafless-120%C2%B0-shaking-head-with-remote-control-Strong-cold-wind-Low-noise-fan-i.732163148.22467822488
[2] https://shopee.ph/-Ready-Stock-idalinya-10pcs-6803-2RS-Rubber-sealed-deep-groove-ball-bearings-17mm-*-26mm-5mm-i.129781433.4538454173