1 / 6
2020 Extrusion drill guide [Dual bearing, and midway drilling]
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drill holes into aluminum extrusions, requires F695 and 695 bearings for holding the drill bit straight and precise.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
Drill holes into aluminum extrusions, requires F695 and 695 bearings for holding the drill bit straight and precise, which you probably already have if you build 3D printers like Vorons, especially if you do 9mm belt mods, which usually require the 695 bearing too.
You can also now use it to create holes not 10mm away from the edge, but anywhere along the extrusions, good for making T connections.
