GMKTec NucBox G3 Plus Fan Case (80mm & 60mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add an 80mm or 60mm fan to the top of the G3 Plus to provide active cooling to the NVME and RAM.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 321
- Wydruki
- 3
- Wyświetlenia
- 2682
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This case has been designed to replcae the lid of the GMKTec G3 Plus (Intel N150) to give active airflow to the NVME and RAM.
Numerous variations/combos available:
- 80mm and 60mm fans
- 25mm and 15mm fan heights
- Enclosed or flat for mounting a fan on top
- With or without integrated fan grill
- No fan hole (solid) for customisation or custom fan holes/grills
8015 Grill version pictured.
There's no easy access to a 12V supply (other than tapping the power cable) so I opted for a USB 5V→12V USB PWM controller so that a standard 4-pin fan could be used. A direct 5V USB fan would also be a good option if you can source one.
There's a couple notches at the back to feed the cable out. Paint a vertical seam line near one to avoid a seam forming on the front.
Uses the existing clips on the G3 to attach. Only the fan needs screws to mount.
No supports!
I've also made a height extension stand to give the CPU fan intake better access to air: https://www.printables.com/model/1334262-gmktec-nucbox-g3-plus-height-extension-stand