Garmin echo 301c gopro clip mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick release mounts.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
It should fit the echo 100, 150 and 300 but i only tested the 301c. The screen attatches with 2 stainless m4 screws with 25mm of threads, the back with small ss wood screws.
If you have a good printer maybe you can print the back with clip but i recommend printing separate and screwing the two together.
There is also a mount for the transducer, its clip is intended to be used upside down so that if something falls onto it it can just release into the water instead of break.
The whole thing is still lower profile than the pivoting mount.
Printed in PETG with 0.6mm nozzle.
You can easily mix and match with other gopro mounting stuff.