1 / 3
Lack Leg Support
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea Lack End Table Leg Support Lack coffee tables sure are great for the price but they're also super flimsy &…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
Ikea Lack End Table Leg Support
Lack coffee tables sure are great for the price but they're also super flimsy & jiggly.
Their jigglyness makes using them as a printer stand a bit problematic. For that reason, I went ahead and threw together this bracket that makes the legs much more rigid.
Supplies needed:
- 4 of these brackets
- 5 1/4inx1in lag screws per bracket (or similar size)
Instructions:
- Apply woodglue to the bottom of the legs before screwing them down into the table top. This alone, will make the table more sturdy.
- Print 4 brackets --STL found here
- Use one of the brackets as a guide to pre-drill the 5 holes per leg. These larger screws will crack the legs otherwise.
- Use the 1/4"x1" lag screws to attach the brackets to the table (you'll need 25 screws total)
optional: I went ahead & applied woodglue underneath the brackets because I'm paranoid.
Category: Office