1 / 3
Lack Leg Support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ikea Lack End Table Leg Support Lack coffee tables sure are great for the price but they're also super flimsy &…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 49
- Makes
- 0
- Views
- 710
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ikea Lack End Table Leg Support
Lack coffee tables sure are great for the price but they're also super flimsy & jiggly.
Their jigglyness makes using them as a printer stand a bit problematic. For that reason, I went ahead and threw together this bracket that makes the legs much more rigid.
Supplies needed:
- 4 of these brackets
- 5 1/4inx1in lag screws per bracket (or similar size)
Instructions:
- Apply woodglue to the bottom of the legs before screwing them down into the table top. This alone, will make the table more sturdy.
- Print 4 brackets --STL found here
- Use one of the brackets as a guide to pre-drill the 5 holes per leg. These larger screws will crack the legs otherwise.
- Use the 1/4"x1" lag screws to attach the brackets to the table (you'll need 25 screws total)
optional: I went ahead & applied woodglue underneath the brackets because I'm paranoid.
Category: Office