Multiboard compatible minimalistic drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pull out drawers that attach to the Multiboard system. Minimal amount of filament needed
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 472
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Yes, yet another drawer system.
Overview
This one attaches to your Multiboard system and is designed to be as minimalist as possible
The drawers pull out and drop down for easy access and inspection.
If you need to take it somewhere, just pull it off the board. Depending on the attachment.
Models
There are various sizes available
50x50 (Single push fit attachment)
50x50 (T-Bolt attachment, inside bin is 3mm shorter)
100x50 (Single and double attachment)
100x50 with divider slot.
100x50 (T-Bolt attachment, inside bin is 3mm shorter)
T-Bolt socket to reach into the 100mm boxes
More to come (Let me know in the comments of other configurations you'd like)
The label version has space for a 41mm x 24mm paper label
How to print
The inside bin and T-Bolt drawers prints without supports.
The push fit outer box, however needs supports and need to be printed on it's back.
On my printer it leaves an ugly surface from the bridging, but it's at the back so you won't really see it. (See Permanent Marker support trick below)Thanks to @ThiagoRiegle_1216478 for this idea:
(See attached screenshot and Box_50x50_little_support.3mf file)
If you swivel the box 45deg on the back corner and cut it into the plate a few mm. Then only add supports for the the edge of the connector, you can save a lot on support material.
PS: I haven't tested it on the 100mm bin yet
Gridfinity bins
If you scale a 6U gridfinity bin to 41x41x42.65 , you can fit 2 inside 100m bin.
Permanent Marker supports trick
If you want a perfect print you can use the permanent marker trick.
Set the interface distance between support and print to 0.0.
In OrcaSlicer the settings are:
Navigate to Support→ Advanced
Top Z distance: 0
Bottom Z Distance: 0
Top Interface layers: 1
Interface Pattern: Rectilinear
Print with supports, pause at the end of the supports layer.
Then color in the surface with permanent marker, except the multiboard connector (red in the screenshot)
Resume the print.
Changelog
50mm outside box. Sunk the connector so that back of box is flush with the board. Should be more secure to the multiboard
Added T-Bolt attachment drawers
Added T-Bolt 50mm and 100mm boxes
Added 100mm boxes with dividers
Add 3md file for 45 deg outer box print, with fewer support
External links:
Multiboard: https://www.multiboard.io/
(T-Bolt originally from here: https://www.multiboard.io/parts-library/threads, included for convenience)