Hand Fan Full Display the friendly maker kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not an usual hand fan!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Summer
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
2 MAIN VERSIONS with 3 variations!
Version 1: half deco
Version 2: full display
Extras:
1- Decorations for multicolor
2- Version with holes for paper or fabric
3- Empty version! This is for your creativity!!
STRESS FREE, SUPPORTLESS, USER ECO FRIENDLY!
No waste, no broken parts, no fatal printing errors.
I printed it with my wrost non calibrated filament!
It is easy to repair because there is a printed screw:
no print in place (1 error = full fail), no waste, just repair or change the bad printed or broken part, use the screw and go!
Why did I use hexagons?
Because backlit they have a bright-tech effect that is very cool to see!
But the real important reason is to save plastic also increasing the resistance of the piece: more empty spaces, more thin spaces, but still very resistant.
I used PETG to try this project.
:D have a nice summer!