Bosch FSN SA to Makita Rail Adapator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adaptor between the Bosch FSN SA jigsaw plate and Makita guide rails.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The Bosch FSN SA jigsaw plate is marketed as working with Makita guide rails, however I found this to not be true due to a horizontal lip on the Makita rails which is not present on the Bosch FSN rails.

The plate itself is well made out of glass fibre nylon and it would be a shame to discard it so I modelled a quick adapter plate which fits snuggly between the plate and rail without requiring modifcations.
I've uploaded the STEP file incase tolerances need adjusting for your rail (I found the 16.00mm dimension to actually be 15.82mm on my rail).
Print settings:
| Material | ABS |
| Perimeters | 5 |
| Infill patttern | Gyroid |
| Infill % | 25 |
| Top layers | 5 |
| Bottom layers | 3 |
| Bridging | Yes |
| Support | No |
