1 / 14
Watering Can EXTENDER & SPRINKLER | Ø ~27mm & 10 liter — zdjęcie 1
1 / 14

Watering Can EXTENDER & SPRINKLER | Ø ~27mm & 10 liter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An easy-to-print WATERING CAN EXTENDER & SPRINKLER for precise watering | diameter Ø ~27mm & 10 liter

Ocena
0 / 5
Polubienia
7
Pobrania
42
Wydruki
0
Wyświetlenia
200
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

An easy-to-print WATERING CAN EXTENDER & SPRINKLER | diameter Ø ~27mm & 10 liter

Those watering roses/spray attachments were always too big for my needs, so I created this extender for more precise watering! 

note: (Transparent) PETG ftw & put some tape around the watering-can-hole to secure the extender & make it more watertight! And if the holes are too squished on the buildplate, just widen them with e.g. a pinboard pin! There is also a little testpiece among the files for testing the diameter! 

Tagi