1 / 14
Watering Can EXTENDER & SPRINKLER | Ø ~27mm & 10 liter — image 1
1 / 14

Watering Can EXTENDER & SPRINKLER | Ø ~27mm & 10 liter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An easy-to-print WATERING CAN EXTENDER & SPRINKLER for precise watering | diameter Ø ~27mm & 10 liter

Rating
0 / 5
Likes
7
Downloads
42
Makes
0
Views
200
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

An easy-to-print WATERING CAN EXTENDER & SPRINKLER | diameter Ø ~27mm & 10 liter

Those watering roses/spray attachments were always too big for my needs, so I created this extender for more precise watering! 

note: (Transparent) PETG ftw & put some tape around the watering-can-hole to secure the extender & make it more watertight! And if the holes are too squished on the buildplate, just widen them with e.g. a pinboard pin! There is also a little testpiece among the files for testing the diameter! 

Tags