3KG Industrial Paper Towel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V2 is only for extra heavy roll of paper towels.
- Ocena
- 4,667 / 5
- Polubienia
- 373
- Pobrania
- 1114
- Wydruki
- 3
- Wyświetlenia
- 4778
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
Update 2025-07-26: Added a sturdier version featuring support beams for improved rigidity. This design is inspired by reinforcement techniques I used on a spool holder that previously flexed under load.
Tip: Print both support beams horizontally with at least 4 perimeters and 50% infill for optimal strength.
Printed in PETG.
0.3 layers.
4-5walls.
20-25% infill.
No supports.
You need to mirror both parts in slicer to get parts for other side.
I printed it with 12% infill and 3 walls and the holder has some flex to it. So if you want it to be stiffer increase those settings or try printing V2 of this model.