DOUBLE MARKER V1-PET STRIP COLORING TOOL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add color to your PET strips with dual chisel-tip markers and pigment while you print. Fully compatible with my models
- Ocena
- 4 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 96
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
✍ DOUBLE MARKER – Color While You Print
Raise your hand if you’ve ever wanted to pigment PET strips on the fly. 🎨✋
Yeah, me too — so I built this. 💡
The DOUBLE MARKER lets you insert two chisel-tip markers (like the Snowman G-12T) directly into the top of the module.
Each tip covers 5 mm of width — so with two aligned pens, you can color an entire 10 mm PET strip in a single pass.
No need to coat strips by hand, or pause your line.
Just slide it into your CORE RAIL V1, press play, and let the system do the coloring.
🔁 Fully Modular
Same footprint and locking geometry as all CORE ecosystem boxes.
Use it before or after a Cleaner, Trimmer, or Spacer — or combine two Double Markers for dual-tone effects.
🖍 Why Two Markers?
Because one only covers half the strip.
With two markers side by side, you get even, full-width coverage — no missed spots, no retouching.
The internal slot guides each pen into the perfect angle and height.
No measuring, no custom clips. Just plug and color.
🧩 Rail-Ready or Freestyle
Mount it onto your CORE RAIL V1, or screw it straight to your bench with two M4s.
Either way, it locks in place and holds steady.
🛠 Minimal Build, Instant Function
No moving parts
No glue required
No recalibration
Just print, insert markers, and go
Print time? Minimal.
Plastic use? Barely a whisper.
But the results? Sharp, vivid, and ready for spooling.
🎯 Why I Built It – Shake’s Take
I wanted to add color to my PET filament without messing with pigments, resins, or sticky liquids.
Markers were the obvious answer — cheap, clean, and already full of ink.
So I designed this little tool to hold two of them tight and press color directly onto the strip as it slides by.
It doesn’t slow the line.
It doesn’t make a mess.
And when I want to swap color? I just pop the markers out.
No cleanup. No rebuild. No downtime.
This is how it’s supposed to be:
Modular. Clean. Fast.
💬 Support the Lab
👉 Downloaded it? Liked it? Used it? Post a Make, leave a comment, or just drop a 💬
Each like and repost helps the Shake Lab keep expanding with more modular tools and cleaner PET workflows.
Let’s keep building. Together.
Better color. Better control. Better filament.
Shake 🖤