Sunlu S1 - Filament guide+Temp/Humidity Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Sunlu S1 Filament Dryer
- Ocena
- 4 / 5
- Polubienia
- 47
- Pobrania
- 274
- Wydruki
- 5
- Wyświetlenia
- 1892
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Temperature and humidity display holder with integrated filament guide/bowden coupler
it uses the screws that is holding the heating element, so be sure to use PETG/ABS or some other high temp stuff
no drilling is required
This is an remix of 2AndreasR81's Hygrometer Sunlu S1 Filament Dryer
and from Thingiverse EveningNewbs's Angled PTFE Tube Guide for Sunlu FilaDryer S1
Credit to both of you !
---------------------------------------------------
Print the items as imported no need to adjust the orientation
My settings:
PETG
Layer height: 0.2
Perimeters: 3
Infill: 20% Rectilinear infill
Absolutely need supports!
I found that to make it strong as possible it must be printed in the orientations like in the picture, also turn down the speed, maybe lower the fan alittle for PETG, and use support everywhere