Bike Rack Reflector Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not actually a reflector, but covers the hole.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I backed into a concrete wall and broke the reflector off the bike rack :-(. This isn't actually a reflector, but it fills the hole.
I used glow-in-the-dark filament for most of it to at least make it visible at night. I printed one layer of GITD filament, then like three or four layers of red. Then finished with the GITD filament.
The hole on my rack has a diameter of 43mm (approx 1-9/16") and the center of the small mounting holes are about 30mm back.
If yours measures a little different, send me the measurements and I can make one quickly and upload it for you.