1 / 5
Bike Rack Reflector Replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Not actually a reflector, but covers the hole.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I backed into a concrete wall and broke the reflector off the bike rack :-(. This isn't actually a reflector, but it fills the hole.
I used glow-in-the-dark filament for most of it to at least make it visible at night. I printed one layer of GITD filament, then like three or four layers of red. Then finished with the GITD filament.
The hole on my rack has a diameter of 43mm (approx 1-9/16") and the center of the small mounting holes are about 30mm back.
If yours measures a little different, send me the measurements and I can make one quickly and upload it for you.