1 / 1
K1C Filament Box — Mountable Dry Box with Silica Gel Chambers — zdjęcie 1

K1C Filament Box — Mountable Dry Box with Silica Gel Chambers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mountable dry filament box for Creality K1C with TPU gaskets and silica gel chambers.

Ocena
0 / 5
Polubienia
30
Pobrania
188
Wydruki
1
Wyświetlenia
956
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Custom filament dry box designed specifically for the Creality K1C printer. It mounts directly to the standard filament holder bracket on the side of the printer.

  • Build volume: 219 × 219 × 96 mm — fits within the K1C print area
  • Two silica gel chambers in the bottom corners — hold desiccant packs or a Zigbee hygrometer
  • Sealed with included TPU gaskets
  • Printed in “transparent” PLA (spoiler: not really transparent)
  • For airtightness, the inside was lined with tape — otherwise, silica gel saturated too quickly
  • Top passthrough hole supports flange_M16x2.stl and flangenut_M16x2.stl from https://www.printables.com/model/77503-prusament-filament-box 

Compared to the Prusament filament box:

  • Honestly, not better — just my version
  • But has dual silica chambers
  • And mounts directly to the K1C

Tagi