1 / 1
K1C Filament Box — Mountable Dry Box with Silica Gel Chambers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mountable dry filament box for Creality K1C with TPU gaskets and silica gel chambers.
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 190
- Makes
- 1
- Views
- 978
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Custom filament dry box designed specifically for the Creality K1C printer. It mounts directly to the standard filament holder bracket on the side of the printer.
- Build volume: 219 × 219 × 96 mm — fits within the K1C print area
- Two silica gel chambers in the bottom corners — hold desiccant packs or a Zigbee hygrometer
- Sealed with included TPU gaskets
- Printed in “transparent” PLA (spoiler: not really transparent)
- For airtightness, the inside was lined with tape — otherwise, silica gel saturated too quickly
- Top passthrough hole supports flange_M16x2.stl and flangenut_M16x2.stl from https://www.printables.com/model/77503-prusament-filament-box
Compared to the Prusament filament box:
- Honestly, not better — just my version
- But has dual silica chambers
- And mounts directly to the K1C