1 / 16
Print-in-Place Articulated City Bus - Solaris Urbino 18 — zdjęcie 1
1 / 16

Print-in-Place Articulated City Bus - Solaris Urbino 18

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Print-in-Place bus with spinning wheels, openable doors and a working accordion midsection. No supports needed.

Ocena
5 / 5
Polubienia
22
Wydruki
2
Wyświetlenia
1338
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Standard Digital File License

This model of the 4th generation of Solaris Urbino bus comes with spinning wheels, working doors on the right side, a detailed interior based on the seating layout of a real bus, and can be printed entirely in one go with no supports needed. The model is split into three parts, all of which fit even on the A1 Mini/Prusa Mini buildplate, making this model truly accessible to everyone with a 3D printer.

This download contains all the segments of the bus, featuring a brand new articulated mid-section add-on with up to 70° range of movement, which improves the bus's manoeuvrability while also increasing its passenger capacity, converting the Urbino 12 into an Urbino 18 bus.

This model is best printed at 100% scale, as all the clearances between moving parts have been carefully selected for that scale.

Despite the limitations of designing a vehicle with interior and working suspension and wheel mechanisms, I was able to preserve all the differentiating and iconic features of the vehicle. Some long bridges may be difficult if you struggle with print cooling, but otherwise, it's a pretty easy model to print. Although this model is intended to be printed without supports, I recommend using some if printing in multicolour, since many slicers have a bug that causes bridges on multicoloured parts to end in mid-air.

Enjoy! :D

Caution: Sharp Edges - Not suitable for children under 9 years due to breakable plastic. Adult supervision required.

Edit: Added spare wheels, in case the original ones break. Connect using filament, 2mm wire or a toothpick.

Tagi