1 / 2
Ingco Drill Multiboard Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mount matching the Ingco Cordless Brushless Drill for Multiboard. I used T-bolts to mount it but any type of small bolts could do the job.
Print settings:
- No supports needed (or maybe just organic/tree supports for the mounting holes)
- Any nozzle size could do, but I used 0.4mm
- Any layer size could work, but I used 0.25mm
- 3 perimeters and 20% infill seem to hold just fine
- I suggest you print in the orientation in which the file is already set, for more strength.
- Any non-flexible popular filament type should work (e.g PLA, PETG, ABS, ASA)