1 / 2
Ingco Drill Multiboard Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount matching the Ingco Cordless Drill for the Multiboard.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 45
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A mount matching the Ingco Cordless Brushless Drill for Multiboard. I used T-bolts to mount it but any type of small bolts could do the job.
Print settings:
- No supports needed (or maybe just organic/tree supports for the mounting holes)
- Any nozzle size could do, but I used 0.4mm
- Any layer size could work, but I used 0.25mm
- 3 perimeters and 20% infill seem to hold just fine
- I suggest you print in the orientation in which the file is already set, for more strength.
- Any non-flexible popular filament type should work (e.g PLA, PETG, ABS, ASA)