RC Car Camera Mount/Bracket (WLToys 284131)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A camera mount for the WLToys 284131.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I do not know if this bracket will work for a genuine GoPro (probably not). Print at your own risk!
This is a simple mount for any camera that is approx. 59mm long and 24.7mm thick. Mine is a cheap $20-ish GoPro clone. You will need four M2.5x3x3.5 heat inserts aswell as four M2.5x12mm screws to assemble this. Fits (almost) perfectly on the WLToys WLToys 284131. You may want to use some zip ties to prevent it from wobbling left and right, but that's optional and even without them the footage still looks great.
The car will want to flip sideways more on uneven grippy terrain especially at high speeds due to the camera being mounted high but it's still very drivable and there's nothing that you can really do about it.
Printed with regular PLA (but a lighter material would work better) at 15% infill.