MKS Gen Controller to MKS Base Controller Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My HicTop Prusa i3 3D Printer originally had an MKS Base V1.3 Controller (also works with V1.4 and V1.5). I replaced…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My HicTop Prusa i3 3D Printer originally had an MKS Base V1.3 Controller (also works with V1.4 and V1.5). I replaced it with an MKS Gen V1.3 Controller and discovered that the mounting holes are different. This mounting bracket allows you to use the MKS Gen in place of the MKS Base and optionally add a small fan.
Update: I have discovered for my setup that the fan is not needed after I added heat sinks to the motor drivers.
Print Settings
Printer Brand:
RepRap
Printer:
Prusa i3
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
30%
Notes:
PLA
Extruder 200C
Bed 60C on Kapton
No supports
Category: 3D Printer Parts