1 / 4
IBM PC - ValuePoint Power Button
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
Model for a replacement power button in the IBM PC ValuePoint series of 486 desktop computers. The hooked legs on these seem to snap easily with age, so this model attempts to give those a bit of reinforcement.
Should be printed at 100% infill. Had the most success printing it in the orientation it will be used such that the layer lines are parallel to the legs. See included .3mf file.
Installation should be as simple as reusing the original spring and inserting it through the front of the case.