Liczymy pasujące modele…
A giant-scale version of the LEGO Flower "Plate 1 x 1 with 5 petals” (24866) piece from 2018, intended for use on the popular Giant LEGO Wreath . Interior diameter of the fitment is 30.0 mm; the same as the basic 1x1 stud piece. Redrawn…
A highly visible (and in my opinion, super cool) set of wormhole tokens for use in Twilight Imperium 4th Edition. This is a multi-color remix of the wormhole gate tokens for Twilight Imperium 4 by Vypper on Thingiverse. Just set a color…
Water tank cap for W639 that is ideally printed in TPU. Inner most diameter is 74mm. That is the exact size of the original part. Print advise: The fit is a tad loose when using TPU. You might want to print at 98% size in the slicer. (As…
Stackable trays / holders. One designed for socket 7 CPUs, so compatible with socket 5/370/A also, other intended for 486 processors. Can be comfortably hold, see photos. Fits smaller beds, with dimensions 157,4x157,4mm it can be printed…
Feel free to use, or modify this model :) It should be accurate enough to make a case/enclosure for this display.
A redesign of the OEM Part 48600698 adapted for 3d printing. I split the original design to allow for installation and replacement without uninstalling the forks. A groove was also added to be able to add a piece of wire to increase…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Give your Framework Laptop 12 motherboard a classic 90s makeover! This 3D printable enclosure transforms your Framework 12 mainboard and battery into a fully functional standalone desktop computer inspired by the iconic beige desktop PCs…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a replacement crane support frame for the Märklin 48674 crane set, in case the original is broken or missing/lost. The part is a little bit undersized, so that is snap-fits onto the crane car. I printed this in Urban Grey…
This is an arduino ILI9486 touch screen case with a battery. The screen with it can be used to control Arduino / ESP devices in your own project. Necessary things: Arduino or ESP32 Screen ILI9486 Battery Li-Pol TP4056 battery charging…
As said in the summary this is a remix of the provided CAD model, I will be using this with parts from “Pico Neo 3 Link Grips for Gunstock” by MadwOrschtX on Thingiverse (https://www.thingiverse.com/thing:5449666) and “Reverb G2…
A small box to store your 486 cpu with a window to see the content inside. Print instructions the window it's archived using a modifier and infill, load the file in prusa slicer and change the pattern for differe results.
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Fuel Die…
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
Ersatz Halter für die Zugbrücke.
lego 6231 4865 23969 93095 23950 30413 91501 4864 14718 2362
If you find my designs useful, please consider sending a tip Somehow lost one of the domed clips that holds the boot scuff / landing plate in place, had absolutely no luck finding any online or even figuring out the correct name for the…
ISDT Q6 Plus and ISDT PC-4860 1-8S Safe Parallel Board XT60 Parallel Charging Board Storage Box. Ideal charger for charging your RC batteries in the field and should fit in your FPV backpack. Storage Box should fit the charger snug and…
This is a 3D-printable replacement for PLAYMOBIL part 3064486 / 30644860 , the small arched window shutter used on the classic PLAYMOBIL 3666 castle . The shutter is designed to fit the matching arched window frame used on the castle and…
This print connects the switch on the front of the case of certain model computers with the switch built into the power supply. I don't have an original to compare against, but this worked great for my purposes. My power switch on the…
An I/O Shield for AT or Baby AT sized systems which usually just have a single onboard connector for an AT keyboard. These are generally 386 / 486 era systems OnShape Model…
Avoid loosing you motherboard with old battery leakages. Simple model. I used PLA. You can fix it with a tie wrap away from the MB in a place where the leakage will not damage any electronics. Weld the battery properly with a simple pair…
The cabinets in my kitchen are old, and after several replacements, the apartment staff said we don't use those anymore- so I modeled up a new one. There are two versions, one with back supports and one without.
Project Expired patents - "Reviving Forgotten Inventions" I search Google Patents for intriguing expired patents and bring them back to life—because I believe they’re either interesting, funny, or genuinely useful. Once I find a design…
The original mainboard of my Packard Bell Pack-mate 486 computer suffered from broken traces due to a battery leak. Original replacement parts are hard to find and other LPX-type mainboards sometimes have a different distance between the…
An I/O Shield for AT or Baby AT sized systems which usually just have a single onboard connector for an AT keyboard. These are generally 386 / 486 era systems OnShape Model…
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
Show your pride and upgrade your duty gear with the Motorola APX 6000 Radio Holster — Thin Blue/Red Line Edition . This is a lightweight, durable 3D-printed holster built to keep your radio secure and accessible—on patrol, at the range,…
This model is compatible with the lego system.
This is a wall mount for a Lego brick Buck Rogers Starfighter / Thunder fighter Ship created according to the MOC 48610 design on Rebrickable created by CBSNAKE . This is similar to my Colonial Viper mount, there are two parts to this…
This model is compatible with the lego system.
This model is compatible with the lego system.
AMD 80 486 and heatsink holder. Modeled from the original, retro PC
This is a wall spacer. If you put your freezer too near to the wall back wall, air circulation goes down. This leads to increased energy usage and wear overall wear on its heat pump. The original spacer is really flimsy and broke quite…
This model is compatible with the lego system.
ORGANIZER GT486 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This model is compatible with the lego system.
This is a plastic replacement coupler that connects the motor to the head of the Craftsman hand grinder Model 315.17340. The coupler's part number from Craftsman is 1-607486-01 and they are no longer available, so I designed up the part…
Show your pride and upgrade your duty gear with the Motorola APX 6000 Radio Holster — Thin Blue/Red Line Edition . This is a lightweight, durable 3D-printed holster built to keep your radio secure and accessible—on patrol, at the range,…
Created in Fusion360 based on the LEGO 2486 i made a L = 6 studs length and a L = 4 studs length printed with PLA , brand = Ariane plast , color dark grey resolution 0.1mm infill 100%
This can be used to bridge the gap if the flex hose inside the contact head broke. In my case it was cheaper to create and print this part instead of buying a new contact head for my Dyson.
This is a low profile bracket for a 1GBPS ethernet card made by TP-Link model TG-3486. I needed a low profile bracket to fit into a Dell Optiplex 3020 as I had lost/never came with the original. Should be an almost perfect fit, might…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
![Twilight Imperium Wormhole Tokens [thing:4866300 remix]](https://media.printables.com/media/prints/317986/images/2777025_a621fef1-5cb2-4840-9242-7b7df00b92aa/pxl_20221120_190403314.jpg)
