Air Duct Window Vent [r.4]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A air duct adaptor to vent fumes out of a window
- Ocena
- 5 / 5
- Polubienia
- 723
- Pobrania
- 2547
- Wydruki
- 11
- Wyświetlenia
- 15 005
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A vent to mount onto a window with a 100mm air duct adaptor.
It can either be ‘hung’ from an airing window, or placed horizontally in a standard window.
The vent area is ~62 cm², which is close to the adaptor/hose area of ~65 cm² (worst case), meaning it shouldn't limit the volume of air too much.
This is part of my Printer Enclosure Ventilation collection.
The model is split to 3 parts for easier printing
The vent (bendy part) has flat edges, so it sticks to the plate and doesn't require supports for the whole length, but a single support is recommended on the round part where it slots onto the adaptor (attached model includes painted supports)
Tolerances are 0.25mm
WARNING: I have not printed/tested revised 150mm versions myself.
Please see makes for other people's verified prints.
Updates
2025-09-09 r.4: Added 150mm sets: 65% (fits into MK4 area) and 100% (full hose area)**
2025-08-05 r.3: Added 150mm hose adaptor *
2025-07-28 r.2: Added step
2025-07-08 r.1: Added stl, replaced 3mf with higher resolution meshes
* This is a larger hose adaptor that fits the original exhaust.
**The area of 150mm hose/adaptor is ~175 cm².
65% version are is ~115 cm², but it just about fits MK4 bed.
100% version is 175 cm².
This doesn't account for the grate, nor the bend itself, which will both constrain the flow of air.
Related
Thanks for sharing the remix!
Drawing
In mm
