Old Work Keystone Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Small Circular keystone bracket for installing any keystone in drywall using a hole saw
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I built this to fill the holes left behind from my Unifi Cameras to leave the Ethernet in place. Inspired by those old work boxes it uses a wood screw and two ears to pull the plate to the wall and pinch it. Ultimately it would work with any keystone should you need it, and you can use a 2 & ¼ inch (57mm) hole saw to make the hole necessary for it! I'm using 1 & ¼ inch long #6 wood screws. I screwed them all the way into the ears before installing them to cut the threads in the plastic. While I used ABS there's no reason I can see that PLA wouldn't work.