Lovesac Power Hub / Keystone Panel

Embed either a 5x3 keystone panel, or a power grommet into a lovesac side. The mount is designed to intended to attach under the cover to hide, and the panel is removable if the M3 screws are removed.

I created this on my own using measurements from my lovesac side. The Voron skirt's keystone was used to create the keystone mounts. It doesn't interface as smoothly as I would like with actual keystones, but I don't have the time to fiddle with that at the moment. There's a blank panel included if you want to create your own.

Hardware:

• M3 3x4x5 heat set inserts (recommend 4, up to 8)

• M3x8 Socket Head Cap Screws (recommend 4,  up to 8)

Additional Hardware:

Keystone:

• Passthrough(s) of your choosing

  • USB-A

  • USB-C

  • HDMI (ie, to a TV or something)

  • Aux

  • etc

• USB PD warts, Docks, etc to provide power

Grommets:

• Any 2" / 2.5" / 3" Power Grommet

Assembly:

• Attach 4-8 heat sets inserts to the back of the mount (3-4 is realistically enough)

  • For v1.1 (no IRL picture), these go in at an angle - they should be pushed in flush with the outer angled edge.

• Place mount in couch

• Insert “fins” into mount (If you want to require panel removal before mount removal.

• Route cables through side and to back of panel

  • Keystones:

    • This means hooking up the back of the keystones

  • Grommet

    • This means attaching the grommet to the panel

• Place panel into mount. Secure with M3 screws.

• Attach lovesac cover.

Update Notes:

1.1

 - Screws are actually captive in the panels now, so the panel should actively hold the mount together and prevent it from flexing. 

- Added 2.5" / 3" grommets