Renault 5 E-Tech Door Compartments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compartment to raise the walls of the door compartment of the Renault 5 e-tech.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 759
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
A compartment to raise the walls of the door compartment of the Renault 5 e-tech.
Because a vehicle heats up a lot in the sun, I recommend using ASA or at least PETG for this model!
Compartments for the left and right door are different. I added STL for both sides. In the 3mf file I used the mirror function in the slicer.
Since I like to have a rounded edge, there's also a radius on the outside, just above the back plate. My X1 Carbon prints this very well with ASA. The rough spots can be easily smoothed with a sharp metal edge or sandpaper.Since I like to have a rounded edge, there's also a radius on the outside, just above the back plate. My X1 Carbon prints this very well with ASA. The rough spots can be easily smoothed with a sharp metal edge or sandpaper.
0.2mm layer height
6 walls
no support needed