Renault 5 E-Tech Door Compartments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compartment to raise the walls of the door compartment of the Renault 5 e-tech.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 130
- Makes
- 1
- Views
- 759
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Standard Digital File License
A compartment to raise the walls of the door compartment of the Renault 5 e-tech.
Because a vehicle heats up a lot in the sun, I recommend using ASA or at least PETG for this model!
Compartments for the left and right door are different. I added STL for both sides. In the 3mf file I used the mirror function in the slicer.
Since I like to have a rounded edge, there's also a radius on the outside, just above the back plate. My X1 Carbon prints this very well with ASA. The rough spots can be easily smoothed with a sharp metal edge or sandpaper.Since I like to have a rounded edge, there's also a radius on the outside, just above the back plate. My X1 Carbon prints this very well with ASA. The rough spots can be easily smoothed with a sharp metal edge or sandpaper.
0.2mm layer height
6 walls
no support needed