1 / 3
Customizable simple Backlit Keycaps - Fusion360
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are a 2 part keycap assembly that allows a simple symbol to be lit up by a keyboard's backlight
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple Fusion360 project that makes it easy to customize a keycap that allows a symbol or letter to be lit up by a keyboard's backlight.
To create your keycap:
- open the Fusion360 project and double click on the sketch in the timeline that is named “EDIT THIS SKETCH”
- Draw your symbol within the box. Make sure there ARE NO ISLANDS in your symbol.
- Click finish in the sketch window and extrude your symbol -1mm
- Make any other changes to the keycap that you want.
- Export the keycap and diffuser bodies separately or use the “Split to Objects” button in Prusa Slicer
- Rotate so the flat faces are on the build plate. No supports necessary.
- Print the diffuser in white (I used PETG) and the keycap in a not really transparent filament (I used grey PLA)