Bosch Universal Circ 18v-53 Circular Saw Holster/Bracket - French Cleat & Screw versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holster for the Bosch Universal Circ 18v-53 Circular Saw.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to holster my Universal Circ 18v-53 Circular Saw. The model as a guide in the slot to keep the unit in place. The French cleat version also has a little storage space on top, and an optional screw hole to keep the unit in place when lifting it up and down (although I've found it's not really needed). The screw version has four countersunk holes at 4mm wide.
This circular saw unit produced by Bosch has a non-standard guide rail system, so may not work with other models.
I printed this with at a 0.4 layer height and 20% honeycomb infill, with supports under the cleat. Make sure supports cover the whole area underneath the cleat or you may have issues.
If you're in the Bosch 18v system, you may also like similar holsters in this collection.