Door Knocker – Ring Prints Inside, No Assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ring prints enclosed in the mouth and rotates freely with a little tension break. Prints in one piece, no assembly.
- Ocena
- 5 / 5
- Polubienia
- 168
- Pobrania
- 522
- Wydruki
- 1
- Wyświetlenia
- 1751
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Standard Digital File License
Because nothing says welcome home like a gargoyle guarding your door with eternal vigilance.
Perfect for adding a gothic touch to your entryway. The ring prints enclosed in the mouth and rotates freely with a little tension break. Prints in one piece, no assembly needed.
🛠 Supports required
Printer: Bambu Lab A1 (or similar)
Material: PLA (Matte Black used here)
Nozzle Size: 0.4 mm
Layer Height: 0.2 mm
Infill: 15-20%
Supports: Required (standard supports, avoid using tree supports to maintain backplate clean edges)
Orientation: Print as shown in reference image
Brim/Raft: Brim recommended for extra adhesion
Estimated Print Time: ~5 hours
Filament Usage: ~200 g for largest size
Post-Processing: Slight tension snap to free the ring, light sanding optional to remove minor support marks