1 / 4
Kirby Case + SD Card Holder Attachment — zdjęcie 1
1 / 4

Kirby Case + SD Card Holder Attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Its kirby as a case with a SD card holder optional attachment

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

The hinge for the case requires a 2mm rod. I used a piece of wire I found but anything stiff and round should work. I hand painted the facial features with some paint.

The SD Card attachment holds 5 standard SD cards and 10 micro SD cards with room for an adapter plus a SD card reader. If you omit the adapter it can hold a max of 6 standard SD Cards. I modeled for the below SD card reader but I believe it should work for any thumb drive reader.

SD Card reader:
https://www.amazon.com/dp/B0B9QZ4W4Y?ref=ppx_yo2ov_dt_b_fed_asin_title

With the SD Card holder modification, there is a slight gap left underneath to put any small items in. I left this there intentionally as I intended to put keys to a box in that space as a little secret hideaway.

To print I just used 10% Infill with supports.

Tagi