Kirby Case + SD Card Holder Attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its kirby as a case with a SD card holder optional attachment
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
The hinge for the case requires a 2mm rod. I used a piece of wire I found but anything stiff and round should work. I hand painted the facial features with some paint.
The SD Card attachment holds 5 standard SD cards and 10 micro SD cards with room for an adapter plus a SD card reader. If you omit the adapter it can hold a max of 6 standard SD Cards. I modeled for the below SD card reader but I believe it should work for any thumb drive reader.
SD Card reader:
https://www.amazon.com/dp/B0B9QZ4W4Y?ref=ppx_yo2ov_dt_b_fed_asin_title
With the SD Card holder modification, there is a slight gap left underneath to put any small items in. I left this there intentionally as I intended to put keys to a box in that space as a little secret hideaway.
To print I just used 10% Infill with supports.
