1 / 1
Skadis Unifi Power Strip (USP-Strip-US)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to vertically mount a Unifi USP-Strip-US on an Ikea Skadis board
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Let's you vertically mount a Unifi USP-Strip-US on an Ikea Skadis board. I made a Peg and T-Nut version but I only tested out the Peg version. The T-Nut version is made for M2.5 screws. As always I left a Fusion file in case anyone wants to tweak the model to their liking.
Both versions are made to be printed on the side so that the pegs are flush with the printer bed to reduce supports