Double-Shear Bearings MOD for Fysetc Venture XL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple press-fit design to improve radial load capacity.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
One tip that I would give who is building the Venture XL is to add double shear bearings to the AB motors. This helps with properly aligning the AB drive assembly, and of course, highly reduces the load on the motor shaft's bearings. It requires two additional F695 bearings and inserts to be printed from PET-CF (stiff + low moisture absorption = higher dimensional stability over time). Print the parts fully solid. Adjust the STEP file if needed so that the bearings and the printed parts have a firm fit (you might need a vice, clamp, or a hammer lol).
VIDEO about Venture XL: