Modular Grid Dividers for e.g. Car Coolers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple, customizable way to keep cans, bottles, and boxes securely in place inside the cooler’s 3.5mm grid cage.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modular Grid Dividers for e.g. Car Coolers
Tired of cans and bottles rolling around in your car cooler?
So was I! After buying a compressor car cooler and hearing my beverage can rattle around during a drive, I spend the past three hours in fusion to create a solution.
Why i designed this
I wanted a simple, customizable way to keep cans, bottles, and boxes securely in place inside the cooler’s 3.5mm grid cage.
The result: a modular divider system that adapts to your needs—no more sliding drinks or messy storage!
Whats Included
The files are organized into two main folders (see the STL's):
Can Divider:
Holds cans, bottles, and other round items snugly in place.
Corner Divider:
Secures boxes or rectangular items, preventing unwanted movement.
For my setup, I used four “Can Single Hori.stl” and one “T Cross Diagonal.stl” to create a fixture that holds one or two 0.5-liter cans perfectly—no more sliding!
Features
- Modular Design: Mix and match pieces to fit your cooler and storage needs.
- Easy assembly: Snap the dividers into the existing 3.5mm grid cage.
- Versatile: Suitable for cans, bottles, boxes, and more.
Assembly & Printing
- All parts are support-free and print easily.
- Recommended material: PLA or PETG for durability and frost resistance.
- No extra hardware required—just print and install.
- make sure to print it a is with no support and 0.16mm hight.
- Size: for 3.5mm bars, the square is 25mm wide.