Hex key holder / Pouzdro na imbusy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hex key holder from 2 to 10 mm. O-ring for holding keys in grip. Compact size
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Compact Hexkey holder for 10, 8, 6, 5, 4, 3, 2.5, and 2 metric keys. There is a gap for O ring in lower part so it holds keys in place. No more fall out of holder. Ideal O ring is about 25mm inner diameter and to 3mm thickness.
You can also try print ring from TPU but I DID NOT TEST IT..
Or use rubber bands instead of O-ring.
For best gap result i cut holder in two pieces, add joint and glue it then. You can print it in one piece but you will need some supports.
Material does not matter I think. I used standart PLA and it works fine.
Print settings:
0,4 nozzle
0,2layer
70mm/s
2 perimeters and 12% gyroid infill
Printed on Ender 3Pro with DDE Titan and V6 clone