Hex key holder / Pouzdro na imbusy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hex key holder from 2 to 10 mm. O-ring for holding keys in grip. Compact size
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Compact Hexkey holder for 10, 8, 6, 5, 4, 3, 2.5, and 2 metric keys. There is a gap for O ring in lower part so it holds keys in place. No more fall out of holder. Ideal O ring is about 25mm inner diameter and to 3mm thickness.
You can also try print ring from TPU but I DID NOT TEST IT..
Or use rubber bands instead of O-ring.
For best gap result i cut holder in two pieces, add joint and glue it then. You can print it in one piece but you will need some supports.
Material does not matter I think. I used standart PLA and it works fine.
Print settings:
0,4 nozzle
0,2layer
70mm/s
2 perimeters and 12% gyroid infill
Printed on Ender 3Pro with DDE Titan and V6 clone