1 / 3
revolver pen/pencil holder for SIGNETTA pen
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy print with minimal supports. Suitable for 627(7*22*7mm) and 608 (7*22*8mm) bearings, or without bearing.
- Ocena
- 4 / 5
- Polubienia
- 26
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 875
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (29)Powiązane
The model is designed with minimal support, clean look, and with big bottom surface area in mind. I used 7*22*7 bearings for the project, and I also made a model for the commonly used 608 bearings. You can also print the model without bearings. One cylinder has 6 slots for standard heyagonal pencils or signetta pens. If you want to remix the model to be suitable for other pens/pencils, or bearing types feel free to edit the .f3d file.