1 / 3
Simplified 693 Bushing Bearing (3mm ID 8mm OD) — zdjęcie 1
1 / 3

Simplified 693 Bushing Bearing (3mm ID 8mm OD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simplified 693 ball bearing that's been simplified into bushings for ease of printing such a small part

Ocena
0 / 5
Polubienia
6
Pobrania
96
Wydruki
0
Wyświetlenia
342
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I needed a 3x 693zz bearings for DPdesign's Over-engineered soft tape measure spool but had none on hand but trying to print ball bearings of such small size would be futility.  In this application it's a low load, low rpm part so I made this VERY simple version that's just two concentric cylindrical bushings that will fit in the footprint of a 693zz bearing. The inner and outer diameters should friction fit to the 693 dimensions.

There's no  ZZ bearing suffix.  Make sure whatever these are bearing isn't going to shift along the axis, these are just two bushings with nothing to hold them together.

I ended up printing this with a PETG-CF filament from inland and they came out perfect for the spool and fit right into place.

 

Printing tips:

  • Separate the parts on the bed.  They are so small if you try to print them in place they will fuse together.  There's only a 0.1mm tolerance.
  • They are extremely small so just print them.  Don't use a brim, that would probably be more filament than these use in the first place.

 

There are two versions, your traditionally sized 3mmx8mm 4mm wide bearing and a slimmer 3mm wide version.

Tagi