Qidi X-Max 3 Closable Vented top cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This riser allows the cover to stay on the machine while allowing it to vent for printing PLA/TPU.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This riser lifts the top cover allowing it to stay on the machine keeping drafts out while venting heat to allow printing PLA or TPU.
It also allows you to close the vents to contain the chamber heat for other filaments like PETG, ABS, ASA, PC.
I recommend printing it PETG or better, I learned from experience that PLA(+) was not a good choice, the first time I heated the chamber to 65 degrees it warped badly and the shutters jammed.
Standard print settings should be fine.
You'll need 4 each of the panels and shutters and one set of corners (the more observant will notice the the diagonals are the same).