1 / 2
Gantry Mounted LED Lightbar 245mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix, length increased to 245mm and made symmetrical. Removed the extruderbracket arm. Made for a CR-10S
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed gantry mounted LED light bar for larger bedslinger printers. Made this to fit on a CR-10S, will probably fit many others.
Needs two M3x6mm screws and two M3 T-nuts. M4 also an option, just drill out the holes a little.
Also modified the frosted glass part to be a little thicker. I happen to have pretty clear filament and this worked for me, diffuses the light a bit more. Original in the correct length also included